Jain IF 3

EX-CEL IF PVC Sheets

integral foamed celuka processed PVC sheet

An expanded, lightweight foam PVC sheet made using the Celuka process. EX-CEL IF has an integral, solid PVC skin, and a foam PVC core, making the sheet stronger, more durable, and therefore longer lasting, which is particularly valuable for high traffic and exterior applications.

Main Features
  • Easy-to-fabricate with standard tools
  • Lightweight
  • Outstanding printability
  • Fine cell structure
  • Low flammability rated UL 94 VO
  • Non-corrosive
  • Non-toxic
  • High impact strength
  • Safe for the environment (no heavy metals)
  • Can be film-masked
  • Chemical and moisture resistant
  • Accepts most paints and vinyl
  • High strength to weight with solid PVC surface and foam core
  • Good thermal and sound barrier
  • Smooth/hi-gloss finish
  
Fabrication Options
  • Cut
  • Rivet
  • Saw/Cut
  • Photo Mount
  • Heat bend/form
  • Easily worked with standard tools
  • Screw
  • Rout
  • Paint
  • Engrave
  • Print
  • Drill
Applications/Markets
  • Advertising signage
  • Long-term signage
  • POP Displays
  • Furniture
  • Exhibit stands and panels
  • Models and prototypes
  • Boat panels and cabins
  • Embossing/Engraving
  • Thermoforming
  • Retail merchandising
  • Refrigeration
  • Replacement for wood
  • Cabinetry
  • Vehicles, including ambulances and RV's
  • Theatrical, musical and movie sets
Sheet Sizes
Thickness Sheet Size Color
10mm 4' x 8' White
10mm 4' x 10' White
13mm 4' x 8' White
13mm 4' x 10' White
16mm 4' x 8' White
19mm 4' x 8' White
19mm 4' x 10' White
25mm 4' x 8' White
25mm 4' x 10' White

EX-CEL IF PVC Sheet: Technical Values

  Property Test Unit Value
A] PHYSICAL      
  DENSITY ASTM D 1505 g/cc 0.50-0.60
  HARDNESS ASTM D 2240 SHORE'D' >40
  WATER ABSORPTION ASTM D 570 % <1.0
B] MECHANICAL      
  TENSILE STRENGTH ASTM D 638 Psi >1595
  ELONGATION ASTM D 638 % >10
  E-MODULUS ASTM D 638 Psi 130000-220000
  FLEXURAL STRENGTH ASTM D 790 Psi >4350
  IZOD IMPACT STRENGTH ASTM D 790 Ft lb/in >9
  CHARPY IMPACT STRENGTH DIN 53253 KJ/M2 >10
  COMPRESSIVE STRENGTH AT 10% DEFORMATION ASTM D 695 Psi >435
  SCREW HOLD (TYPICAL FOR 25MM SHEET) ASTM D 1761 lbs/inch >265
C] THERMAL      
  VICAT (B/50) ASTM D 1525 °F >160
  COEFFICIENT OF LINEAR THERMAL EXPANSION ASTM D 696 °C-1 5.56X10-5
  THERMAL CONDUCTIVITY ASTM C 177 W/m K 0.1
  HEAT DEFLECTION TEMP @ 1.8 MPa ASTM D 648 °F ~140
  RATE OF HEAT TRANSFER DIN 52616 W/m2 K 3.0 FOR 10mm
2.0 FOR 19mm
  BURNING RATE ASTM D 635 In/min No burn when flame removed
D] ELECTRICAL      
  SURFACE RESISTIVITY ASTM D 257 Ω >1014
  VOLUME RESISTIVITY ASTM D 257 Ω-cm >1015
  DIELECTRIC CONSTANT ASTM D 150 - 1.7
E] FLAMMABILITY      
  COUNTRY: UK BS476; Part 7 - Class 1
  COUNTRY: USA UL 94   94 V-0; 94 5-V
  COUNTRY: FRANCE NFP 92-501   M1
F] STANDARD DIMENSIONS AND COLOR      
  COLOR Cap Layer White J 1054
  THICKNESS 8, 10, 13, 19, 25, 30 mm
  WIDTH 1000, 1220, 1250, &1560 mm (1560 width is only available up to 19mm)
  LENGTH 2000, 2440, 2500 & 3000, 4880 & 5490 mm
  FLATNESS
*Special color, lengths and widths as per customer request		 8mm per meter for 8 & 10 mm. Above 10mm – 3mm per meter
G] TOLERANCE ON DIMENSIONS      
  LENGTH -0, +10 mm
  WIDTH -0, +5 mm
  THICKNESS +/-(0.1 + 0.05 x S) S = thickness of the sheet

ALL INFORMATION GIVEN FOR PROPERTIES ARE BASED ON A TYPICAL SAMPLE, IS ACCURATE TO THE BEST OF OUR KNOWLEDGE, AND IS PROVIDED WITHOUT LIABILITY OR COMMITMENT WHATSOEVER. IN AS MUCH AS JAIN IRRIGATION SYSTEMS LIMITED HAS NO CONTROL OVER THE USE TO WHICH OTHERS PUT ITS MATERIAL, IT DOES NOT GUARANTEE THAT THE SAME RESULTS AS THOSE DESCRIBED HERE, WILL BE OBTAINED. EACH USER OF THE MATERIAL SHOULD MAKE THEIR OWN TEST IN THEIR OWN LOCAL CONDITIONS TO CONFIRM THE SUITABILITY OF OUR PRODUCT FOR PARTICULAR USE. TECHNICAL SPECIFICATIONS ARE SUBJECT TO CHANGE.